Practical guide to cleaning a black tiled joint
In every home, there are corners prone to the accumulation of dirt. Tile joints are such a magnet for mold and grime. So if you need a helping hand to bring your bathroom or kitchen back to life, you've come to the right place. In our article of the day, we share lots of simple and effective methods for cleaning a tile grout. On the program: grandmother's tips and 10 magic formulas to prepare a cleaning product yourself.
Page content
3 How to clean tile joints with homemade products 4 How to whiten tile joints? 5 Black bathroom grout: what to do in case of dirt stubborn? Cleaning a tile joint: a big household challenge
Page content
Removing dirt or stubborn stains can be a big challenge when it comes to tile joints. This is mainly due to the fact that the joints are usually deeper than the surface of the tiles. Thus, all kinds of dirt accumulate there: crumbs, mold, blackened spots, etc. To clean the problem areas, one must then resort to the use of certain effective cleaning products. In addition, you can prepare a wide range of mixtures based on ingredients that you already have at home. Let's take a closer look at the process together, as well as some simple DIY product ideas to try out right away.
There are various techniques to easily succeed in household chores
Cleaning the bathroom or kitchen tiles: the household routine step by step
In order to keep your trendy tiles shiny and clean, you need to give them regular care. For this, nothing more suitable than creating a cleaning routine, which includes three key steps, including: washing, brushing and rinsing. In addition to these household techniques, consider using a homemade product/mixture for effective cleaning. Now here is how the cleaning magic happens step by step.
What are the key moments in an effective cleaning process?
Apply a cleaning product to the joints
Allow the cleaning product to act on the surface for a certain time (about fifteen minutes). If you are using a commercial (not homemade) product, be sure to read the instructions carefully and follow them.
Use the appropriate products and if possible favor natural components
Remove dirt with a brush
On this point, the best alternative is to use a brush. This is a more suitable option compared to sponges or cloths because it allows you to reach even the smallest corners. Moreover, we advise you to favor brushes with soft bristles which will not damage the surface of the tiling. Nylon models are a suitable alternative.
Use a brush with soft bristles to avoid damaging the surface of the tiles
Rinse with lukewarm water
After scrubbing the joints, it is important to rinse the entire surface with lukewarm, clean water. This is an essential step in effective cleaning. For what ? Because if you don't remove any soap residue or dirt from the tiles, grime will quickly build up on the grout again.
Remember to rinse with lukewarm water to remove any dirt residue
How to clean tile joints with homemade products
Below, we provide you with 10 magic formulas to prepare an easy homemade cleaner and with products that we already have on hand . It should be noted, however, that the degree of effectiveness varies depending on the ingredients used. In general, mixtures based on hydrogen peroxide show better results. Nothing prevents you from testing the different preparations to find your favorite solution.
Zoom in on the different combinations of successful products for properly cleaning tile joints
DIY product with sodium carbonate
Products:
In a container, mix all the products without the water. Then slowly add water to the mixture. Transfer to a sprayer. Spray the surface and leave to act before rubbing.
Another excellent alternative for cleaning tiles
Baking soda-based cleanser
Products:
In a spray bottle, mix all the products. Spray the chosen surface and leave to act for about twenty minutes. Finally, rub.
Mix of white vinegar, baking soda and lemon juice
DIY product with Epsom salt
Products:
Mix all the elements. Pour the mixture on the tile, scrub and rinse.
A combination of Epsom salt, baking soda, and liquid dish soap
Cleanser with hydrogen peroxide
Products:
Mix then pour on the tiles. Leave to act for about 10 minutes. Scrub and rinse.
Hydrogen peroxide is one of the most effective products
Product with only two ingredients
Ingredients:
Sprinkle the floor with baking soda to cover the surface well. Spray with hydrogen peroxide and wait 10 minutes before scrubbing.
A convenient 2-ingredient blend
Cleanser with essential oil
Products:
In a large container, mix the products. Then pour into a sprayer. Spray the tiles with the mixture and leave to act for a few minutes.
Product that smells good and disinfects the surface thanks to the use of an essential oil
Castile Soap Cleanser
Products:
Mix all the ingredients then clean the tiles with this preparation.
For best results, let the mixture sit for a few minutes
Product based on hydrogen peroxide and essential oil
Products:
Mix the vinegar with the hydrogen peroxide and the essential oil of your choice. Then, pour in hot water and stir.
Rub the joints carefully, then rinse them with lukewarm water
Cleanser with white vinegar
Ingredients:
In a spray bottle, mix the two ingredients. Stir and spray joints. Wait about 10 minutes before rubbing.
The duo: white vinegar and dishwashing detergent is another suitable option for light stains
DIY multi-ingredient product
Ingredients:
Mix the ingredients in a spray bottle. Spray chosen surfaces, scrub and rinse.
Spray the surfaces, then scrub and rinse to restore the shine to the tiles
How to whiten tile joints?
The main trick is to simply let the cleaner work longer. In this way, it will be able to lighten and even whiten the joints.
A simple idea: squeeze the juice of a fresh lemon. Then, use it to disinfect the joints by letting the juice sit for about twenty minutes. You can also use white vinegar.
Black bathroom grout: what to do in case of stubborn dirt?
You have cleaned the tiles thoroughly, but the condition of the grout is not always pleasant? Well, sometimes tile needs a more intense cleaning, especially if it hasn't been cleaned for a long time. So how do you get rid of the dirt?
Use strong products
Although they are more effective, it is still recommended to use them with caution as they can be dangerous for you and for the equipment (some substances can damage the surface tiles, for example)
Opt for acidic products
Here, we are talking about a use really as a last resort. As acidic products are quite harmful, it is rather advisable to avoid them. However, if you decide to opt for such a product, do not forget to take certain precautionary measures such as putting on a pair of gloves.
Never forget to use protective gloves
Redo the tile joints
In case you are frankly disgusted with the air in your joints and you can't do anything more to improve their condition, all you have to do is renew them. This is a delicate process where approximately two-thirds of the existing grouting must be removed using a grinder or scraper. So, if you are not ready for such a drastic adventure, you can also simply apply dye-sealant on the existing joints.
The most adventurous people can even start renewing joints
